- Il n'y a plus d'articles dans votre panier
- Livraison gratuit
- Total 0,00 €
Marque: Eric Grauffel
Patch
Rouleau de 2000 patches. Diamètre 23mm Couleur Dispo: Blanc, Noir ou Marron
Marque: Sellier & Bellot
Munitions Sellier & Bellot FMJ calibre 9x19 mm 124grs boîte de 50
Calibre : 9 mm Luger (9x19 mm ou 9 mm Parabellum) Poids : 8 grammes - 124 grains Projectile : Blindé FMJ Vitesse initiale : 360 m/s Énergie initiale : 518 Joules
This M4 Replacement Kit includes the Revolution trigger along with a selection of optional springs to achieve a variety of release weights depending on your application. The combination of our unique trigger with its improved sear geometry and the roller trigger, this kit is an ideal drop-in trigger for any M4 or AR-type rifle. At a price much lower than any other trigger solution, this kit along has been shown to yield a smooth roll-off feel that allows for consistent shot placement when accuracy is required.
The springs included with this kit include the yellow hammer and trigger springs, which may be used for competition and recreational applications with hand loads or domestic made non-military ammunition. The yellow/yellow combination results in a release weight in the 3.0-3.5 lb range on most receivers. Also included is the red hammer spring for use with military (5.56 NATO) or foreign-manufactured ammo with low-sensitivity primers. The red hammer spring MUST be used on any tactical duty (LE) installations and any AR-10 type installation for 100% ignition reliability. The yellow/red combination results in a release weight of 3.5-4.0 lbs on most receivers.
Référence: JPSS2-MAINT-K15
JP Silent Captured Spring Maintenance Kit - AR15
Silent Captured Spring Maintenance Kit for AR-15 models (tall bumper)
Référence: JPFP-223TI
Marque: JP Enterprises
AR-15 Titanium Firing Pin
AR-15 Titanium Firing Pin .223
Référence: JPRE-2B
Marque: JP Enterprises
JP Recoil Eliminator 1/2"-28 TPI Standard Version for AR-15/M16
Référence: JP-JPFCP-1EZ
Marque: JP Enterprises
JP EZ Trigger Fire Control Package
The new JP EZ Trigger™ represents the best performance value and strikes the best compromise between safety, performance, value and mission-specific versatility. Once you try it, we hope you will agree.
Référence: JPTRE3-2B
Marque: JP Enterprises
Competition Series Compensator Small
1/2-28 TPI with exit hole for .223.750 OD at threaded end .281 exit Polished stainless steel
Référence: JP-JPROS
Marque: JP Enterprises
JP Rail Offset Adapter, Quick Detach 45° on Bore Axis, 1.25"
A true quick detachable 45° rail offset adapter for any Picatinny accessory. This can be used on typical quad-rail hand guards to yield a 45° on bore axis position (1:30 or 10:30 position). For example, the JPoint or JP Short Range Tactical Sight (JPSRTS) can be mounted on two JPROS at 1:30 for a right-handed operator.