Pas de fournisseur
Marque: Eric Grauffel
Rouleau de 2000 patches. Diamètre 23mm Couleur Dispo: Blanc, Noir ou Marron
Référence: SP500
AFIN DE VALIDER VOTRE COMMANDE, VEUILLEZ NOUS FAIRE PARVENIR LES DOCUMENTS SUIVANTS À L'ADRESSE ADMIN@ERICGRAUFFEL.COM : Copie de votre licence FFT ou Permis de chasser (En cours de validité) Copie recto verso de votre pièce d’identité (CNI, passeport, en cours de validité)
Marque: Sellier & Bellot
MUNITIONS CAT. B Afin de valider votre commande, veuillez nous faire parvenir les documents suivants à l'adresse admin@ericgrauffel.com : Numéro SIA Copie recto verso de votre pièce d’identité (CNI, passeport, en cours de validité) Copie de votre licence FFTir (Détention de 1000 Munitions maximum /par arme , dans la limite d'achat de 3000 Munitions...
Bannière
Produit testé & utilisé par notre équipe
Expédié sous 24H
Téléchargez vos documents pour les produits classés
Silent Captured Spring Buffer Retainer Pin and Spring
While you can use a standard buffer retainer pin and spring with your Silent Captured Spring, installation and removal is difficult to say the least. Until now, that's left the only option of storing the SCS loose. Fortunately, we have a solution.
This new buffer retainer pin design allows for easy installation and removal of the Silent Captured Spring while ensuring unerring retention. Your SCS will never drop unexpectedly out of your lower again. Plus, this design works equally well with a standard AR buffer and spring.
It's a little thing, but what a difference it makes.
Compatibility:
Like a standard buffer retainer pin, this design is not compatible with Variable Mass Operating System (VMOS™) carriers.
This buffer retainer pin is designed to work only with conventional buffer tubes and not those with a slotted lip feature designed to extend around the buffer retainer pin. The slotted feature may prevent this buffer retainer pin from fully presenting and will not retain the SCS. When running a Silent Captured Spring in this type of buffer tube, we recommend against use of buffer retainer pin.
This buffer retainer is designed for use with the JP Silent Captured Spring and will not retain a standard buffer assembly as well as a Mil-spec buffer retainer.
Aucun avis n'a été publié pour le moment.
Référence: JP-RPBT-R
COMPATIBLE: AR-15 - les parties communes, 223
Référence: JP-JPBT-CA
Enhanced Carbine Buffer Tube This JP-SPEC revision of the standard Mil-spec buffer tube improves on the original in both design and finish. We've included an addition stock position (for a total of seven) and given a finer surface finish for smoother function. This design is also designed to allow extra threading into the receiver, which optimizes...
Référence: JPS-OSC.308
Custom Centerless Ground and Polished Operating SpringLarge-Frame Carbine Length
Référence: JPSCS2-15
Marque: JP Enterprises
Small Frame / AR-15 Standard Weight
Référence: JP-HPG
Marque: JP Enterprises
Hogue Pistol Grip with JP Logo
Référence: JP-JPSCS-SPA
Marque: JP Enterprises
Référence: JP-JPSH-1D
Marque: JP Enterprises
Low Mass High Speed Hammer for Small Pin (.154) Receivers
Référence: JPFP-223TI
Marque: JP Enterprises
Small Frame (AR-15) Firing Pin
Référence: JPTRE3-2B
Marque: JP Enterprises
Competition Series Compensator1/2-28 TPI.750 OD.281 exitMatte black / Polished Stainless Steel
Référence: RAD-R0148
Marque: JP Enterprises
Référence: JPFCP-1R-BLK
Marque: JP Enterprises
Référence: JP-JPROS
Marque: JP Enterprises
A true quick detachable 45° rail offset adapter for any Picatinny accessory. This can be used on typical quad-rail hand guards to yield a 45° on bore axis position (1:30 or 10:30 position). For example, the JPoint or JP Short Range Tactical Sight (JPSRTS) can be mounted on two JPROS at 1:30 for a right-handed operator.
Référence: JPSCS2-SM-2
Steel Weight for Silent Captured Spring/VMOS™ Carrier Designed to replace one or more of the existing weights of the JP Silent Captured Spring or VMOS™ Bolt Carrier, these steel weights are the standard components used for reciprocating mass in the operating system.
Référence: JPFPRP-223
Marque: JP Enterprises
Small Frame (.223)
Référence: JP-JPGS-5B
Marque: JP Enterprises
JP Adjustable Gas SystemLow profile | 1-Piece.750 boreBlack stainless steelLocking Adjustment
Référence: JP-JPFC-SAD
Marque: JP Enterprises
Référence: JPSCS2-MAINT-K10
Silent Captured Spring Maintenance Kit for AR-10 models (short bumper)
Référence: JPAW-2
Marque: JP Enterprises
Référence: JP-JPSL3
Marque: JP Enterprises
Référence: JP-JPTR-FS
Marque: JP Enterprises
Référence: JPTRE-5. 12S.875
Marque: JP Enterprises
Large-Profile Compensator1/2-28 TPI.875 OD.281 ExitStainless steel
Référence: JP-JPSL2-Red
Marque: JP Enterprises
Référence: JPSCS2-MAINT-K15
Silent Captured Spring Maintenance Kit for AR-15 models (tall bumper)
Référence: JP-JPAW-1
Marque: JP Enterprises
Torx Head
Référence: JP-JPFCP-1EZ
Marque: JP Enterprises
The new JP EZ Trigger™ represents the best performance value and strikes the best compromise between safety, performance, value and mission-specific versatility. Once you try it, we hope you will agree.
Référence: JP-JPBT-CA
Enhanced Carbine Buffer Tube This JP-SPEC revision of the standard Mil-spec buffer tube improves on the original in both design and finish. We've included an addition stock position (for a total of seven) and given a finer surface finish for smoother function. This design is also designed to allow extra threading into the receiver, which optimizes...
Référence: JP-JPSCS2-HM-2
Tungsten Weight for Silent Captured Spring/VMOS™ Carrier Designed to replace one or more of the existing weights of the JP Silent Captured Spring or VMOS™ Bolt Carrier, these tungsten weights are the standard components used for reciprocating mass in the operating system.
Référence: JPSCS2-ORING-PK
Marque: JP Enterprises
Référence: JPRE-2B
Marque: JP Enterprises
JP Recoil Eliminator.750 OD1/2-28 TPIMatte black
Référence: JP-RPBT-R
COMPATIBLE: AR-15 - les parties communes, 223
Référence: JP-JPSCHA-LP
Marque: JP Enterprises
Référence: JPSCS-PACK-XS
Marque: JP Enterprises
Silent Captured Spring Auxiliary Rate Spring Kit JPSCS2-XS for Maxim Defense CQB Stocks
Référence: JPJN.12S.750
Marque: JP Enterprises
Référence: JP-JPEB-223EJK
Marque: JP Enterprises
Référence: JP-JPTD650L
Marque: JP Enterprises
Référence: JPGS-9D
Marque: JP Enterprises
JP Adjustable Gas SystemLow profile | 2-Piece.750 boreBlack stainless steelDetent Adjustment
Référence: JP-JPSL1-Blue
Marque: JP Enterprises
