- Il n'y a plus d'articles dans votre panier
- Livraison gratuit
- Total 0,00 €
Marque: Eric Grauffel
Patch
Rouleau de 2000 patches. Diamètre 23mm Couleur Dispo: Blanc, Noir ou Marron
Marque: Sellier & Bellot
Munitions Sellier & Bellot FMJ calibre 9x19 mm 124grs boîte de 50
Calibre : 9 mm Luger (9x19 mm ou 9 mm Parabellum) Poids : 8 grammes - 124 grains Projectile : Blindé FMJ Vitesse initiale : 360 m/s Énergie initiale : 518 Joules
Original JP Fire Control Kit
This kit for .154 small pin receivers consists of a JP trigger with engagement and overtravel screws and disconnector spring installed as an assembly, disconnector, instructional video, and our standard array of springs: yellow reduced power trigger spring both yellow and red reduced power hammer springs.
Spring Selection Guide:
- Competition/Recreation
The yellow/yellow combination may be used for competition and various recreational applications with hand loads or domestic-manufactured, non-military ammunition. It will result in a release weight in the 3.0-3.5 lb. range on most receivers. - Enhanced Ignition Reliability
The yellow trigger spring combined with the red hammer spring will yield a release weight of 3.5-4.0 lbs. on most receivers and offers increased reliability for (5.56 NATO) or foreign-manufactured ammo with low sensitivity primers. The yellow-red springs must be used for any large-frame AR installation to ensure 100% ignition reliability. This is also the minimum acceptable combination for tactical duty (LE) installations and should be used only with domestic-manufactured ammo in this application.
Référence: JP-JPROS
Marque: JP Enterprises
JP Rail Offset Adapter, Quick Detach 45° on Bore Axis, 1.25"
A true quick detachable 45° rail offset adapter for any Picatinny accessory. This can be used on typical quad-rail hand guards to yield a 45° on bore axis position (1:30 or 10:30 position). For example, the JPoint or JP Short Range Tactical Sight (JPSRTS) can be mounted on two JPROS at 1:30 for a right-handed operator.
Référence: JPFP-223TI
Marque: JP Enterprises
AR-15 Titanium Firing Pin
AR-15 Titanium Firing Pin .223
Référence: JPFCP-1R-BLK
Marque: JP Enterprises
JP EZ Trigger Fire Control Package with Armageddon Gear Revolution Roller Trigger .156 Small Pin Receivers
Référence: JP-JPSCS2
Marque: JP Enterprises
Silent Captured Spring G2
JP Silent Captured Spring G2 with H2 Weight
Référence: JPS-OSC.308
JP Custom Buffer Spring
Custom Centerless Ground and Polished Operating SpringLarge-Frame Carbine Length
Référence: JPSCS2-MAINT-K10
JP silent Captured Spring Maintenance Kit - AR10
Silent Captured Spring Maintenance Kit for AR-10 models (short bumper)