- Il n'y a plus d'articles dans votre panier
- Livraison gratuit
- Total 0,00 €
Marque: Eric Grauffel
Patch
Rouleau de 2000 patches. Diamètre 23mm Couleur Dispo: Blanc, Noir ou Marron
Marque: Sellier & Bellot
Munitions Sellier & Bellot FMJ calibre 9x19 mm 124grs boîte de 50
Calibre : 9 mm Luger (9x19 mm ou 9 mm Parabellum) Poids : 8 grammes - 124 grains Projectile : Blindé FMJ Vitesse initiale : 360 m/s Énergie initiale : 518 Joules
This gas block is the minimized small bore design intended to mount underneath many hand guard models on the market.
This model also now includes our locking adjustment feature, which consists of an integral brass set screw that can be tensioned against the adjustment screw after it has been set to prevent any migration that might occur.
- Full coverage around gas port providing improved seal and better heat dissipation
- True clamp-on design with four positive clamping screws
- Easy to access side gas adjustment
Specifications:
- Material: 416 stainless
- Finish: Stainless
- Weight: 2.25 oz.
- Length: 1.28"
- Height: 1.40" (overall), .775" (over bore)
- Width: .85"
- Attachment: 6-32 x 1/2" socket head screws, T15 Torx drive (included)
(includes 5/64 x 5/16 roll pin for gas tube installation) - Adjustment: 6-32 x 3/8" set screw, 1/16 hex drive (included)
Référence: JP-JPROS
Marque: JP Enterprises
JP Rail Offset Adapter, Quick Detach 45° on Bore Axis, 1.25"
A true quick detachable 45° rail offset adapter for any Picatinny accessory. This can be used on typical quad-rail hand guards to yield a 45° on bore axis position (1:30 or 10:30 position). For example, the JPoint or JP Short Range Tactical Sight (JPSRTS) can be mounted on two JPROS at 1:30 for a right-handed operator.
Référence: JPSCS2-SM-2
JP Steel Weight
Steel Weight for Silent Captured Spring/VMOS™ Carrier Designed to replace one or more of the existing weights of the JP Silent Captured Spring or VMOS™ Bolt Carrier, these steel weights are the standard components used for reciprocating mass in the operating system.
Référence: JP-JPBT-CA
JP Enhanced Carbine Buffer tube
Enhanced Carbine Buffer Tube This JP-SPEC revision of the standard Mil-spec buffer tube improves on the original in both design and finish. We've included an addition stock position (for a total of seven) and given a finer surface finish for smoother function. This design is also designed to allow extra threading into the receiver, which optimizes...
Référence: JPS-OSC.308
JP Custom Buffer Spring
Custom Centerless Ground and Polished Operating SpringLarge-Frame Carbine Length