No supplier
Brand: Sellier & Bellot
ONLY for french market
Brand: Eric Grauffel
Roll of 2000 pasters, diameter 23mm Color available: Black, White, or Brown
Banner
Product tested & used by our team
Shipped within 24H
Upload your documents for classified elements
After we sold thousands of our famous first-generation FL-2000 case cleaners, customers who had purchased them began asking us to address the problem of separating the cleaned and polished brass from the cleaning media.
We knew from the beginning that the simplest method of separating would be a rotating squirrel cage, but we had to find a design we could manufacture economically. Our problem was that it had to be BIG -- big enough to handle the entire load of the FL-2000-series case cleaners.
The solution was an injection molded reversible part. Simple, and it works great. The CM-2000 Case/Media Separator is large, 10" x 14", and will hold more than 1,600 .38 Special cases. It sits on a large media collection tub that measures 18" x 22". The tub keeps the mess off the floor and bench. It's fast -- so fast it will remove media from 1500 rounds of .223 brass in a matter of seconds.
The CM-500 Case/Media Separator is scaled down in size and designed to handle the load of a CV-500 Case Cleaner. This piece of equipment are every bit as tough as its full-sized counterpart. We used the same materials in its construction and designed it to work just as hard -- and do it in a more compact area!
Specific References
No customer reviews for the moment.
Reference: 19473
Brand: Dillon
Small Dillon Tumbler in 220 Voltage
Brand: Armscor
This product is sold only in France - DOM For more information don't hesitate to contact us : alice@ericgrauffel.com For Shipping (EU) we have need : - Copy transfert permit (cat.B10 with details of components ) - Copy of your passport - License of your club - Proof of address 4 to 6 weeks for the permit
Reference: 10483
Brand: Dillon
D-Terminator electronic scale by Dillon, 110V. Adapter 220 V optional
Reference: 13141
Brand: Dillon
Replacement Carbide cutting blade. Each blade has three cutting surfaces, each cutting surface is good for trimming hundreds of thousands of cases!
Reference: 19473
Brand: Dillon
Small Dillon Tumbler in 220 Voltage
Reference: 62202
Brand: Dillon
Reference: 13239
Brand: Dillon
This heavy-duty nylon cover comes equipped with a D-ring, allowing the zipper to be locked.
Reference: 13755
Brand: Dillon
Dillon's two-compartment ammo bag is constructed with a flexible inner liner that will allow the entire volume to be accessible from either zippered opening. You'll never again mix fired brass with loaded rounds! Exterior dimensions: 6" wide X 6" tall X 12" long
Reference: 546515
Brand: Hornady
9mm Luger 9x21 (.355) 3-Die Set Titanium Nitride Brand : HornadyModel : Custom Grade Series : Serie IIReference : 546515Type : Full Length (FL)Caliber : 9x19 mm (9 Para) et 9x21 (9 mm IMI)Shell holder ( non provided ): #8
Reference: 17950
Brand: Dillon
Fits the RL550, XL650 and XL750 loaders. Top option to have if you load large quantities!
Reference: 050009
Brand: Hornady
Hornady Case Lube for an easy sizing of your shells
Reference: 62510
Brand: Dillon
Variable Speed Casefeeder CASEFEED PLATE NOT INCLUDED
Reference: 18146
Brand: Dillon
Dillon's shooting mat is made of tough ballistic-weave nylon fabric, with a large skid-resistant elbow pad area. The "ground" side is moisture resistant and wipes clean easily. The padding is dense, closed-cell foam to provide both shooter comfort equipped with a shoulder strap, a carry handle and two straps with snap-release buckles. Dimensions: 66" x...
Reference: 546548
Brand: Hornady
44SPL / 44Mag Auto 3-Die Set Titanium Nitride Brand : HornadyModel : Custom Grade Series : Serie IIReference : 546548Type : Full Length (FL)Caliber : 44SPL / 44MagShell holder ( non provided ):
Reference: 22311
Brand: Dillon
Our new Bullet Tray Kit works either with or without a Strong Mount. If your reloading bench is at the right height for you, the new Bullet tray kit will mount directly on your bench under your reloading machine.
Reference: 17947
Brand: Dillon
Berrys Bullet Puller Four Collet Set
Reference: 62164
Brand: Dillon
Makes short work out of trimming large quantities of rifle brass.
Reference: BBDRH650-BU-ARMANOV
Brand: Armanov
Reference: 14415
Brand: Dillon
Just the sizing die! Handgun Caliber is a carbide die Rifle Caliber is a STEEL die
Reference: 546516
Brand: Hornady
Brand : HornadyModel : Custom Grade - Taper CrimpSeries : Serie IIReference : 546516Type : Full Length (FL)Caliber : 9x19 mm (9 Para) et 9x21 (9 mm IMI)Shell holder ( non provided ): #8
Reference: 13795
Brand: Dillon
This great looking nylon cover adds security to your loading bench. Your reloader will be protected against more than dust as these covers come with a D-ring that allows the heavy duty zipper to be locked. Note: The cover does not go over a bullet tray, loaded cartridge bin, or a roller handle. It will cover the standard straight handle with the ball...
Reference: 80019
Brand: Dillon
Ammo Box 50 rounds for either handgun or rifle ammunitions
Reference: 22310
Brand: Dillon
Our new Bullet Tray Kit works either with or without a Strong Mount. If your reloading bench is at the right height for you, the new Bullet tray kit will mount directly on your bench under your reloading machine.
Reference: 00108
Brand: Dillon
220V Adaptator for D-Termniator Scale
Reference: 20444
Brand: Dillon
Casefeeder kit for your 550 Casefeeder Plate to be bought separately Casefeeder conversion to be bought separately
Reference: 21073
Brand: Dillon
Small pistol Casefeed plate .32, 380, 9mm, 38 Super, 30 Carbine Large pistol Casefeed plate 40 S&W, 10 mm, 38 Special and larger, 7.62 x 39 Small rifle Casefeed plate 204 Ruger, 222, 223 Remington Large rifle Casefeed plate 22-250 and larger
Reference: 22047
Brand: Dillon
The biggest Dillon Tumbler.
Reference: 13909
Brand: Dillon
Don't Adjust dies when switching calibers. These Precision tool holders hold your dies in perfect alignment, making caliber changes quick and easy. Powder die not included!
Reference: 20782
Brand: Dillon
Powder Measure
Reference: 62169
Brand: Dillon
Super Swager Parts | Swager Adapter | 9mm / .38 Spc Super Swager Parts | Swager Adapter | .40 S&W
Reference: 546533
Brand: Hornady
40S&W - 10mm Auto 3-Die Set Titanium Nitride Brand : HornadyModel : Custom Grade Series : Serie IIReference : 546533Type : Full Length (FL)Caliber : 40S&W - 10mm AutoShell holder ( non provided ): #10
Reference: 103333
Brand: Double Alpha
The DAA Case Lube is a result of much testing and experimentation to find the best performing formula. The non-aerosol spray-cap bottle is easy and efficient to use: Simply lay your cases out in an open flat box, and spray lightly with one or two passes. Quick and efficient. The lube contains a high percentage of alcohol and so will dry swiftly leaving...
Reference: 19797
Brand: Dillon
Case trimmer sizing die
Reference: 14047
Brand: Dillon
Locator Buttons are sold individually. Adjust the quantity to the amount you require, the default quantity is one button..
Reference: 20049
Brand: Dillon
The secret of really punching out a lot of rounds in a hurry. Have these tubes filled and ready to go. Your choice, large or small.
