Brand: Eric Grauffel
Roll of 2000 pasters, diameter 23mm Color available: Black, White, or Brown
Brand: Xtreme
Tanfoglio Xtreme Hammer Spring, designed to fit the Xtreme parts.
Brand: Xtreme
Tanfoglio Xtreme Firing Pin Spring, especially designed for Xtreme Firing Pin to improve ignition of your primers.
Banner
A characteristic of virtually all progressive reloading machines, regardless of brand, is that the dies are set rather close together. When you are first setting up a "naked" machine, there is plenty of wrench room, but if you have a need to adjust a die afterward, it often requires a delicate touch to maneuver a lock ring on a crowded toolhead.
Dillon Precision has addressed this in two ways. We now offer new 1" die lock rings and a 1" Bench Wrench to fit them. This combination gives much more room to re-adjust dies after they're already mounted. The opposite end of our new wrench is a 7/16" box-end for adjusting the Powder Bar of any Dillon Powder Measure. Our new lock rings fit any standard 7/8" x 14 dies.
Reference: 13755
Brand: Dillon
Dillon's two-compartment ammo bag is constructed with a flexible inner liner that will allow the entire volume to be accessible from either zippered opening. You'll never again mix fired brass with loaded rounds! Exterior dimensions: 6" wide X 6" tall X 12" long
Reference: 13239
Brand: Dillon
This heavy-duty nylon cover comes equipped with a D-ring, allowing the zipper to be locked.
Brand: Dillon
Replacement Carbide cutting blade. Each blade has three cutting surfaces, each cutting surface is good for trimming hundreds of thousands of cases!
