The F7 LED tactical flashlight was developed especially for the needs of law enforcement. This lamp develops up to 4 white lighting modes and 4 different light intensities (1600 lumens, 600 lumens, 250 lumens and 10 lumens). It can fulfill different missions such as night road checks, professional interventions, remote identification of people, judicial or technical and scientific police operations. The lamp is turned on by pressing the main switch located on the back of the lamp.

In case of emergency and to dazzle an assailant, it is possible to activate the high intensity strobe lighting mode of 1000 lumens.

If necessary, it is possible to use the F7 tactical flashlight to create an SOS emergency signal in illuminated Morse code.

TECHNICAL CHARACTERISTICS

White LED

Battery charge indicator: Green +50% / Steady red 50% to 30% / Flashing red -30%

High intensity turbo*: 1600 lu / 2.25 h

High intensity: 600 lu / 4.5 h

Medium intensity: 250 lu / 6.5 h

Low intensity: 10 lu / 200 h

Strobe and SOS: 1000 read / 2.5 h

Power supply: Rechargeable lithium battery (included) or 2 CR 123 lithium batteries

Made of Aluminum

Very robust plastic box, lockable with padlock

USB-C charging

2 year warranty under normal conditions of use

* The lighting range in high intensity Turbo mode and on a clear day is approximately 240 meters

HIGH INTENSITY TURBO LIGHTING (1600 LU)

High-intensity lighting is the first in the cycle of available modes so that it can detect an individual at a long distance or dazzle an individual if law enforcement officers have to react urgently and use their lamp.

Press the main switch. If the button is pressed lightly, the lamp will turn on momentarily and turn off when the button is released.

To lock the lighting continuously, press the button until it “clicks”.

The lighting will then be maintained even if the pressure on the button is released.

To turn off the lamp, press the push button firmly again until it “clicks”.

CONTINUOUS LIGHTING IN HIGH, MEDIUM AND LOW INTENSITY (600, 250, 10 LU)

Once the lamp is turned on at very high Turbo intensity, briefly press the pedal button located on the side of the central button to access the other intensities.

Chronologically, with each press of this pedal button you will activate the high intensity mode of 600 lumens, then the medium intensity mode of 250 lumens, then the low intensity mode of 10 lumens.

Release the button when you are in the desired lighting mode.

LIGHTING IN STROBOSCOPIC MODE

In case of emergency and to dazzle an assailant, it is possible to activate the high intensity strobe lighting mode of 1000 lumens.

To do this, press and hold the pedal button located on the side of the main ignition button.

This mode is accessible immediately whether the lamp is off or already on in one of the other modes described previously.

STROBOSCOPIC LIGHT INCLUDES MORSE SOS MODE SIGNAL

To do this, activate the lamp in a continuous lighting mode then press the pedal button located on the side of the main ignition button for 2 consecutive seconds.

Strobe mode will activate as described above, but after two consecutive seconds of pressing, you can release the button and the lamp will retain its strobe lighting with SOS Morse code.

To deactivate it, briefly press the footswitch button to return to the previously selected continuous lighting mode or press directly on the main power button to turn off the lamp

COMPOSITION OF THE COMPLETE KIT

F7 Tactical Flashlight

2600 mAh rechargeable battery (1)

Battery charger (USB cable, AC outlet adapter)

Cigarette lighter socket vehicle adapter

Black cordura nylon belt pouch

Replacement wrist strap and O-rings

Lockable rigid box