- Il n'y a plus d'articles dans votre panier
- Livraison gratuit
- Total 0,00 €
Marque: Eric Grauffel
Patch
Rouleau de 2000 patches. Diamètre 23mm Couleur Dispo: Blanc, Noir ou Marron
Marque: Sellier & Bellot
Munitions Sellier & Bellot FMJ calibre 9x19 mm 124grs boîte de 50
Calibre : 9 mm Luger (9x19 mm ou 9 mm Parabellum) Poids : 8 grammes - 124 grains Projectile : Blindé FMJ Vitesse initiale : 360 m/s Énergie initiale : 518 Joules
As a replacement for traditional three-piece gas rings, the JPEGR-223 utilizes a one-piece design similar to the McFarland rings. Unlike the McFarland rings, though, our precision-ground gas rings are engineered to precisely suit small-frame carrier group components such as our own JP EnhancedBolt™.
After testing numerous minute grind callouts, the final JP Enhanced Gas Rings spec is the perfect balance of a solid gas seal with a very low-friction relationship between rings and bolt carrier. Reducing the resistance between these components directly results in an overall increase in the rifle's operational window while the edge of the rings utilizes the cycling action itself to scrape the walls of the carrier, helping shed fouling with every shot.
Référence: JP-JPROS
Marque: JP Enterprises
JP Rail Offset Adapter, Quick Detach 45° on Bore Axis, 1.25"
A true quick detachable 45° rail offset adapter for any Picatinny accessory. This can be used on typical quad-rail hand guards to yield a 45° on bore axis position (1:30 or 10:30 position). For example, the JPoint or JP Short Range Tactical Sight (JPSRTS) can be mounted on two JPROS at 1:30 for a right-handed operator.
Référence: JP-JPBT-CA
JP Enhanced Carbine Buffer tube
Enhanced Carbine Buffer Tube This JP-SPEC revision of the standard Mil-spec buffer tube improves on the original in both design and finish. We've included an addition stock position (for a total of seven) and given a finer surface finish for smoother function. This design is also designed to allow extra threading into the receiver, which optimizes...
Référence: JP-JPAW-1
Marque: JP Enterprises
JP Oversize Anti-Walk Pins, .156 small pins (set of 2)
Torx Head
Référence: JPGS-9D
Marque: JP Enterprises
Low profile | 2-Piece .750 bore Black stainless steel Detent Adjustment
Référence: JPFP-223TI
Marque: JP Enterprises
AR-15 Titanium Firing Pin
AR-15 Titanium Firing Pin .223
Référence: JP-JPSH-1D
Marque: JP Enterprises
JP AR Speed Hammer
Low Mass High Speed Hammer for Small Pin (.154) Receivers
Référence: JPSCS2-MAINT-K10
JP silent Captured Spring Maintenance Kit - AR10
Silent Captured Spring Maintenance Kit for AR-10 models (short bumper)