Tanfoglio Xtreme Firing Pin, especially designed to work with firing pin safety!

IPSC Production Legal

This new Tanfoglio Xtreme Firing Pin has been designed to work in all Tanfoglio pistols. This new firing pin is longer, heavier and has a new redesigned hammer impact surface to increase the reliability of your firearm while using light trigger pulls.

IPSC Production Legal

Tanfoglio Xtreme Hammer Spring, designed to fit the Xtreme parts.

Tanfoglio Xtreme Hammer Spring, designed to fit the Xtreme parts, but also will be working on the OEM parts.

2 weights available:

Medium: 15,5 lbs, recommended for any factory ammunitions.

Light: 13,8 lbs, recommended for hand loaded ammunitions, mays also work for some factory ammunitions

It is recommended that you take the Xtreme Firing Pin Spring of the same rate than the Xtreme Hammer Spring in order to optimize the ignition of your ammos.

IPSC Production Legal

Important Warning:Modification to your firearm may nullify the manufacturers warranty. This product must be installed by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

Tanfoglio Xtreme Firing Pin Spring, especially designed for Xtreme Firing Pin to improve ignition of your primers.

Tanfoglio Xtreme Firing Pin Spring, especially designed for Xtreme Firing Pin to improve ignition of your primers.

2 weights available:

Medium: recommended for any factory ammunitions for hard primers

Light: recommended for hand loaded ammunitions with soft primers, mays also work for some factory ammunitions

It is recommended that you take the Xtreme Firing Pin Spring of the same rate than the Xtreme Hammer Spring in order to optimize the ignition of your ammos.

IPSC Production Legal

Important Warning:Modification to your firearm may nullify the manufacturers warranty. This product must be installed by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

Double Action Trigger developped for production shooters!

IPSC Production Legal

The new Tanfoglio Xtreme Trigger has a new shape close to a single action shape. It has been developped to be Plug and Play so there are no fitting. you will just have to adapt and glue your over travel screw.

IPSC Production Legal

Warning:Modification to your firearm may nullify the manufacturers warranty. This product must be installed by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

New xtreme guide rod 2.0

Xtreme Guide Rod 2.0 is 10% heavier than factory guide rod for a better recoil control.
Available in 2 models:

Short: For Stock, Stock 2, Gold Custom Eric 2007-2010

Long: For Gold Custom Eric, Stock 3, Limited, Limited HC..   

Important Warning:
Modification to your firearm may nullify the manufacturers warranty. This product must be installed by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

Xtreme Sear Lever Chromed 

+0.3mm to be used with Xtreme Firing Pin.

Mandatory requires fitting as it is oversized.

Spring is not included!

Important Warning: Modification to your firearm may nullify the manufacturers warranty. This product must be installed by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

Xtreme Chromed Trigger Bar 

Xtreme Sear Housing Chromed 

New Xtreme front sight for Tanfoglio.

Front sight comes with a 1mm optic fiber when the Tanfoglio factory is 1.5mm.
Now available with awidth of 3mm or 2.5mm, there are 4 heights available which will enable you to have a perfect zeroing no matter the caliber and bullet weight used.
The particular conception of the front sight extends the fiber optic life time. Don't loose your fiber while shooting anymore, choose the Xtreme Front Sight 2.0!

Important Warning:
Modification to your firearm may nullify the manufacturers warranty. This product must be installed by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

Tanfoglio Xtreme Grips 

The screws are not included

NOW ON STOCK

Tanfoglio Xtreme Grips now available. Extra slim panel with a great grip surface to optimize your shooting! A back rounded panel to have a confortable feeling while holding your pistol.

May require some little fitting/adjustment. DOES NOT FIT ROUNDED TRIGGER GUARD FRAMES

Options:

1/ Small ( usually 9X19, 9X21 and .40SW calibers ) or Large Frame ( HC gun models, .38 super and .45ACP )

2/ Full size ( no magwell) or custom size ( to be fitted with magwell ) 

3/ Colors: Black, Silver, Red & Blue

Important note for installation: The Xtreme grips have been produced to tight tolerances to ensure the fit to the frame is tight with no movement.  When installing the grip screw follow these instructions. Insert the grip and apply pressure on the grip on and upward 45 degree angle to pressure the grip into the frame. Insert the screw into the grip and line it up with the frame at a 90 degree angle before attempting to screw it in. The fit will be very snug against the grips to minimize movement. Only when the screw is going straight in and NOT on an angle slowly install the screw until it is flush with the grips. Do not attempt to install the screw if it is not at the correct 90 degree angle otherwise cross threading may occur.

Important Warning: Modification to your firearm may nullify the manufacturers warranty. This product must be installed by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

The screws are not included