- Firearms Accessories
- Firearms parts
- Shooter's Equipment
- Eric Grauffel
- New Products
The formula 1 reloading machine
Product tested & used by our team
Shipped within 24H
Upload your documents for classified elements
Shipping Quoted separatly after order!
The Dillon Super 1050 is the "Flag Ship" of the Dillon reloading machine line, and for good reason. This top-of-the-line machine is used world wide by the most serious competition shooters, who want to load lots of ammo, and as quickly as possible.
Set up for intimate performance, and with a GSI attached, this machine can achieve speeds of close to 2000 rounds per hour! Under normal "average" conditions, speeds of 1200 rounds per hour are easily achieved.
Auto indexing shellplate
One set of dies
Built in primer pocket swager
Automatic powder measure system
Automatic priming system
Electric casefeeder This is a commercial grade machine, is capable of loading 1,000 to 1,200 rounds per hour and carries a one year warranty.
Dillon Super 1050 Press Its features include and it comes with:
* Automatic Casefeeder
* Automatic Indexing
* Eight-Station Interchangeable Toolhead
* Primer Pocket Swaging Station
* Automatic Powder Measure System
* Automatic Priming System
* Low Primer Warning System (sounds audible alarm)
* Loaded Cartridge, Auto-eject System
* Plastic Bullet Tray (mounts to press)
* Standard (not ball-end) hex key set (allen wrenches)
* Uses Standard 7/8″ x 14 Dies (included)
* Loading Rate: 1000+ Rounds per Hour
The Super 1050s lengthened frame and new crank assembly have been improved to provide greater strength and smoother operation, especially when advancing the shellplate. In addition, the increased stroke now accommodates rifle calibers while the handle stroke is kept to a minimum, meaning less work for the operator.
It comes complete with a Casefeeder, Roller Handle, and Dies. In fact, the only options to consider are the Powder Check system and the Bullet Tray; the latter replacing the plastic bullet tray standard with the machine. Youll find the primer pocket swager invaluable, even if only a single piece of military brass sneaks through your machine. In fact, the priming swaging station, in addition to seating the primer on the downstroke, are the two main advantages of the machine over the XL 650
The Dillon metal primer flip tray makes it easy to fill primer pick-up tubes. The heavier metal tray makes it less likely for primers to bounce over while filling, and the larger diameter of our try allows use of larger primer packaging, such as used by Federal.